Compatibility / AC charging route
Type 2 is primarily the AC reference point; do not confuse it with a complete CCS2 DC inlet.
Type 2 charging is common across European AC infrastructure. Adapter direction depends on whether the Type 2 connector is on the vehicle or the charging cable, and on the inlet used by the other side.
Standard overview
Type 2 Charging Standard Compatibility
A tethered or untethered Type 2 charging setup can differ in cable arrangement and phase capability. The vehicle’s onboard charger ultimately controls accepted AC power, so an adapter rating does not increase the vehicle’s charging capacity.
What this page can answer
- Whether the requirement appears to be AC or DC
- Which connector direction should be investigated
- Which product family is relevant to that direction
- Which vehicle and station details remain necessary
What it cannot confirm alone
- Compatibility with every vehicle or charger
- A guaranteed real-world charging power
- Charging-network access or payment eligibility
- Model-specific certification without document mapping
Direction map
Read the route from charging source to vehicle
Type 2 AC cable -> GB/T AC vehicle
Confirm the source connector, vehicle inlet and charging mode, then review the product and communication requirements.
GB/T AC source -> Type 2 vehicle
Use the native interface where possible. If a different source or vehicle inlet is involved, record both ends before choosing a product.
Compatibility decision
Six checks before hardware selection
| Check | Question | Why it matters |
|---|---|---|
| 1. Market version | Where was the vehicle originally sold? | Vehicles sharing a badge can use market-specific inlets and software. |
| 2. Vehicle inlet | What is physically installed on this exact vehicle? | Confirms the receiving interface and prevents reversed adapter selection. |
| 3. Charging source | What connector is on the cable or station? | Defines the source side and the adapter direction. |
| 4. Charging mode | Is the intended session AC or DC? | AC and DC routes are not interchangeable. |
| 5. Communication | What vehicle, station and software combination is involved? | A physical match alone does not validate the charging handshake. |
| 6. Evidence status | Has this combination been reviewed or field-tested? | Keeps confirmed, conditional and unverified combinations clearly separated. |
Performance boundary
Adapter rating and actual charging are different values
The adapter or connector rating describes the product’s maximum designed operating envelope. The charging session is negotiated and limited by the vehicle, BMS, charger, cable, temperature, state of charge and software. Use the lowest applicable system limit and treat unverified combinations as requiring manual review.
Vehicle limit
Onboard charger or DC charge curve, battery temperature, state of charge and software.
Station limit
Available voltage, current, cable capability, station model, firmware and site power.
Adapter limit
Model-specific voltage, current, thermal, ingress and control specifications in the applicable documentation.
FAQ
Interface questions
Is connector fit enough to confirm compatibility?
No. Charging mode, communication, vehicle version, station model and software can all affect the result.
Can an adapter increase the vehicle’s charging power?
No. It cannot override the vehicle, battery or station limits. The lowest applicable system limit controls the session.
How do I confirm the direction?
Name the connector coming from the charging source first and the vehicle inlet second, then state whether the requirement is AC or DC.
What evidence should I send?
Send the vehicle model and year, original market, inlet photo, charger connector and label, required charging mode, and any error code or session video.
Map both ends before choosing the adapter.
Send a clear vehicle-inlet photo and the connector or label from the charger. We will identify the relevant product route and flag combinations that still require manual validation.